Wrought iron patio set – Given the cost of replacing patio furniture wrought iron, it makes sense to repair it. Do it yourself with a little effort and time at minimal cost. Since you are breathing new life into your furniture, this is a good time to consider changes in the finish. Is the original black still takes your breath away, or prefer rich patina verdigris or other color? Your patio furniture wrought iron repaired and maintained properly, it should last a lifetime.
Repairing wrought iron patio set, Add 1/4 cup of liquid dish soap to a bucket of warm water and rub your wrought iron furniture with a brush to remove dirt and debris. Rinse by spraying with a hose, removing all soap residue. Dry your patio furniture wrought iron with a cotton towel or a hair dryer, and then let dry completely in a well ventilated, preferably in sunlight area. Sand as necessary to remove rust or chipped paint. Sand all the way through to completely remove oxidation.
Paint the area with a rust remover green becomes a black powder if rust is present. Brush the black residue to remove the final traces of rust. Take your piece of iron forged a professional welder for repairs before continuing if it is not broken or weak sections. Apply a corrosion resistant primer to all surfaces and let dry completely. Apply two thin coats and uniform corrosion resistant, according to the manufacturer’s instructions on the tin paint to cover repairs and brighten your furniture. Let your wrought iron patio set furniture dry, undisturbed, in a protected for 24 hours before use area.